ASTM F1444-2000(2009) 用直接传热纸标签印刷机法测定动态热敏感性的标准试验方法

作者:标准资料网时间:2024-05-16 19:17:35 浏览:8058 来源:标准资料网

【英文标准名称】:StandardTestMethodforDeterminingDynamicThermalResponseofDirectThermalPaper-LabelPrinterMethod
【原文标准名称】:用直接传热纸标签印刷机法测定动态热敏感性的标准试验方法
【标准号】:ASTMF1444-2000(2009)
【标准状态】:现行
【国别】:美国
【发布日期】:2000
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:F05.06
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:
【英文主题词】:directthermalpaper;dynamicthermalresponse;dynamicthermalresponsecurve;thermalprinter;thermalsensitivity;Copymaterials/products--electrostatic;Directthermalimaging;Dynamicthermalresponse;Thermaltransferimagingsystems
【摘要】:Thistestmethodenablesdynamicthermalresponsecomparisonsbetweendirectthermalpapers.Thistestmethodmakescomparisonsbetweenandwithinthermalpaperproductionlotsfromthesamemanufacturer.1.1Thistestmethodcoversthethermalresponseofdirectthermalpaperstodetermineuniformitywithinandbetweenlots.Thistestmethodmayalsobeusedtotestdirectthermalproductsotherthanpaper.1.2TheHobart18VPThermalLabelPrinterdescribedinthistestmethodmaybeusedforspecificationacceptance,productdevelopmentorresearchapplications,orboth,andmanufacturingcontrol.1.3Althoughaspecificmanufacturerhasbeenidentifiedforthisequipment,anythermallabelprinterwithequivalentsignaloutputcapabilitiesandsamplesizerequirementswouldbesuitable.1.4Thevaluesstatedininch-poundunitsaretoberegardedasstandard.ThevaluesgiveninparenthesesaremathematicalconversionstoSIunitsthatareprovidedforinformationonlyandarenotconsideredstandard.1.5Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.(Warning8212;Thistestmethodrequiresmakingpoweradjustmentsandtriggerprintingwhiletheprotectivecoverisoff,therebyexposingtheusertoelectricalhazards.)
【中国标准分类号】:J87
【国际标准分类号】:37_100_10
【页数】:4P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: ASTM F1051-2000(2009) 比较多次打击薄膜打字色带的标准试验方法
下一篇: ASTM D2060-2000(2010) 测量拉链尺寸的标准试验方法

Product Code:SAE J2403
Title:Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature
Issuing Committee:Truck And Bus Electrical * Electronic Steering Committee
Scope:This SAE Recommended Practice is applicable to all E/E systems on MD and HD vehicles. The terms defined are largely focused on compression-ignited and spark-ignited engines. Specific applications of this document include diagnostic, service and repair manuals, bulletins and updates, training manuals, repair data bases, under hood emission labels, and emission certification applications.This document focuses on diagnostic terms, definitions, abbreviations, and acronyms applicable to E/E systems. It also covers mechanical systems which require definition.Nothing in this document should be construed as prohibiting the introduction of a term, abbreviation, or acronym not covered by this document. The use and appropriate updating of this document is strongly encouraged.Certain terms have already been in common use and are readily understood by manufacturers and technicians, but do not follow the methodology of this document. To preserve this understanding, these terms were included and have been identified with the footnote (2), 'historically acceptable common usage,' so they will not erroneously serve as a precedent in the construction of new names. These terms fall into three categories:a. Acronyms that do not logically fit the term.b. Acronyms existing at the component level, i.e., their terms contain the base word or noun that describes the generic item that is being further defined.c. Acronyms for terms that appear to contain the base word, but are frequended and have been identified with the footnote (2), 'historically acceptable common usage,' so they will not erroneously serve as a precedent in the construction of new names. These terms fall into three categories:a. Acronyms that do not logically fit the term.b. Acronyms existing at the component level, i.e., their terms contain the base word or noun that describes the generic item that is being further defined.c. Acronyms for terms that appear to contain the base word, but are frequently used as a modifier to another base word. (This use may possibly be thought of as following the methodology since the acronym is normally used as a modifier.)tly used as a modifier to another base word. (This use may possibly be thought of as following the methodology since the acronym is normally used as a modifier.)

基本信息

标准名称：	压力容器第4部分:制造、检验和验收
英文名称：	Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
中标分类：	机械 >> 通用机械与设备 >> 压力容器
ICS分类：	流体系统和通用件 >> 流体存储装置 >> 压力容器、气瓶
替代情况：	部分代替:GB 150-1998
发布部门：	中华人民共和国国家质量监督检验检疫总局中国国家标准化管理委员会
发布日期：	2011-11-21
实施日期：	2012-03-01
首发日期：	1989-02-22
作废日期：
主管部门：	全国锅炉压力容器标准化技术委员会(SAC/TC 262)
提出单位：	全国锅炉压力容器标准化技术委员会(SAC/TC 262)
归口单位：	全国锅炉压力容器标准化技术委员会(SAC/TC 262)
起草单位：	合肥通用机械研究院、中国特种设备检测研究院、中国石化工程建设公司、兰州石油化工机器厂、大连金州重型机器有限公司、中石化南京化学工业公司化工机械厂
起草人：	崔军、陈学东、寿比南、杨国义、陈永东、李世玉、谢铁军、王冰、徐锋、陈建玉、刘静、韩冰、姚佐权
出版社：	中国标准出版社
出版日期：	2012-03-01
页数：	32页

适用范围

本部分规定了GB150适用范围内的钢制压力容器的制造、检验与验收要求;其他材料制压力容器的制造、检验与验收要求按相关标准。
本部分适用的压力容器结构形式为单层焊接压力容器、锻焊压力容器和多层压力容器(包括多层筒节包扎、多层整体包扎、钢带错绕和套合容器)。
对于奥氏体型钢材制低温压力容器(设计温度低于-196℃),由参与建造的各方协商规定附加的制造、检验与验收要求,由设计单位在设计文件中予以规定。

前言

没有内容

前言 Ⅲ 1 范围 1 2 规范性引用文件 1 3 名词术语 2 4 总则 3 5 材料复验、分割与标志移植 4 6 冷、热加工成形与组装 4 7 焊接 10 8 热处理 12 9 试件与试样 15 10 无损检测 16 11 耐压试验和泄漏试验 19 12 多层容器 21 13 容器出厂要求 24

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB150.1—2011 压力容器第1部分通用要求
GB150.2—2011 压力容器第2部分材料
GB150.3—2001 压力容器第3部分设计
GB/T196 普通螺纹基本尺寸
GB/T197 普通螺纹公差
GB/T228 金属材料室温拉伸试验方法
GB/T229 金属材料夏比摆锤冲击试验方法
GB/T232 金属材料弯曲试验方法
GB/T1804 一般公差未注公差的线性和角度尺寸的公差
GB/T25198 压力容器封头
GB/T21433 不锈钢压力容器晶间腐蚀敏感性检验
JB/T4700 压力容器法兰分类与技术条件
JB/T4701 甲型平焊法兰
JB/T4702 乙型平焊法兰
JB/T4703 长颈对焊法兰
JB/T4704 非金属软垫片
JB/T4705 缠绕垫片
JB/T4706 金属包垫片
JB/T4707 等长双头螺柱
NB/T47014(JB/T4708) 承压设备焊接工艺评定
NB/T47015(JB/T4709) 压力容器焊接规程
JB/T4711 压力容器涂敷与运输包装
JB/T4730.1 承压设备无损检测第1部分:通用要求